On-site energy from
what hospitals
already throw away.
Kitchen waste, STP sludge, and biomedical-adjacent organic streams converted into clean cooking gas and digestate, with audit-grade compliance documentation built in. The plant slots into existing facilities operations without disrupting clinical workflows.
The clinical-side segregation that makes this work.
Hospital waste streams cannot mix. Anaesthetic, pharma, sharps, and pathological waste must remain in their own colour-coded streams under BMW Rules. What our plants accept is the kitchen-side organic stream and STP sludge, already separated by your housekeeping team.
From waste to working plant.
Same four-stage process across every sector, but tuned to the inputs, peaks, and outputs that matter here.
What goes in.
The substrate determines plant size, gas yield, and everything downstream. Here is what we typically design for in this sector.
Drag. See your plant.
Slide to your scale. The output ranges below are based on typical performance from plants we operate. Final numbers come after a feedstock audit and DPR.
Built around the regulations that govern hospitals.
Compliance is engineered in from the design stage, sensor-driven audit trails, automatic reporting, and pre-filled regulatory submissions are part of the plant, not bolted on afterward.
Better than what you do today.
Compared head-to-head against the three things you might do instead with the same waste stream.
Five phases. Predictable.
A typical hospitals deployment moves through these five phases. Timelines are real, not aspirational.
Inside an operating hospitals plant.
Visual landmarks of a typical plant in this sector. Real photos go here once approved by the operator.
Hospitals already running.
A small selection of operators we work with in this sector.
Things hospitals always ask.
Six questions we hear in nearly every first conversation with a hospitals operator.
Designing for hospitals?
30 minutes with our team. Walk out with a feedstock audit checklist, indicative plant size, and a clear next step.
Talk to us about your hospitalSix services. Pick what you need.
Some clients start with monitoring on an existing plant. Others come for a full turnkey build. We meet the operator where they are.